Standard | With APC | |||
Travel | X-axis travel (Cross movement of table) Y-axis travel (Vertical movement of spindle head) Z-axis travel (Longitudinal movement of table) W-axis travel (Spindle extention) Distance from table surface to spindle centerline Distance from table centerline to spindle gage plane |
inch inch inch inch inch inch |
118.1 90.5 63 27.5 OP: 15.7 with High speed spindle 0 ~ 90.5 31.5 ~ 94.4 |
118.1 90.5 78.7 27.5 OP: 15.7 with High speed spindle 0 ~ 78.7 31.5 ~ 94.4 |
Table | Table working surface Table loading capacity Min. table indexing angle |
inch lbs deg |
70.8 x 86.6 26,400 OP: 44,000 0.0001 |
170.8 x 86.6 18,700 OP: 33,000 0.0001 |
Spindle | Rotating spindle diameter Spindle speed Milling spindle nose diameter Type of spindle taper hole 30min/cont. |
inch min-1 inch -- HP |
5.1 4.3: High speed spindle 5 ~ 2,500 40 ~ 8,000: High speed spindle 9.8 7/24 taper No. 50 AC 30/25 OP: 40/30, 36/30 |
5.1 4.3: High speed spindle 5 ~ 2,500 40 ~ 8,000: High speed spindle 9.8 7/24 taper No. 50 AC 30/25 OP: 40/30, 36/30 |
Feedrate | Rapid traverse rate X, Y Rapid traverse rate Z Rapid traverse rate W Rapid traverse rate B Feedrate X, Y, Z |
ipm ipm ipm deg/min ipm |
393.7 393.7 236.2 500 0.04 ~ 157.5 |
393.7 393.7 236.2 500 0.04 ~ 157.5 |
ATC | Type of tool shank Type of retention knob Tool storage capacity |
-- -- -- |
MAS BT50 MAS P50T-1 (45deg) 38 OP: 60, 90, 120 |
MAS BT50 MAS P50T-1 (45deg) 38 OP: 60, 90, 120 |
Power source | Electric power supply Power capacity Compressed air supply Pressure Compressed air supply Flowrate |
-- kVA psi N gal/min |
AC200/220V +/-10% 50/60Hz+/-2% 67/74 72.5 ~ 116 208 OP: 364 |
AC200/220V +/-10% 50/60Hz+/-2% 67/74 72.5 ~ 116 234OP: 390 |
Machine size | Machine height Floor space Mass of machine |
inch inch lbs |
191.5 272.6 x 272.4 85,800 |
191.5 312.4 x 427.3 114,400 |
Accuracy | Positioning accuracy X, Y, Z Positioning accuracy W Repeatability X, Y, Z Repeatability W Table indexing accuracy Any angle Table indexing repeatability |
inch inch inch inch deg deg |
+/-0.0002 / full stroke +/-0.0004 / full stroke +/-0.0001 +/-0.0002 +/-3" +/-2" |
+/-0.0002 / full stroke +/-0.0004 / full stroke +/-0.0001 +/-0.0002 +/-3" +/-2" |