Standard | With APC | |||
Travel | X-axis travel (Cross movement of table) Y-axis travel (Vertical movement of spindle head) Z-axis travel (Longitudinal movement of table) W-axis travel (Quill extention) Distance from table surface to spindle centerline Distance from table centerline to spindle gage plane |
inch inch inch inch inch inch |
59 47.2 27.5 15.7 0 ~ 47.2 17.7 ~ 45.2 |
59 39.3 27.5 15.7 0 ~ 39.3 17.7 ~ 45.2 |
Table | Table working surface Table loading capacity Min. table indexing angle |
inch lbs deg |
39.3 x 47.2 8,800 0.0001 |
39.3 x 47.2 7,700 0.0001 |
Spindle | Rotating spindle diameter Extended quill diameter Spindle speed No. of spindle speed range Type of spindle taper hole Spindle bearing inner diameter 30min/cont. |
inch inch min-1 -- inch HP |
4.9 7.8 20 ~ 3,000 OP: 15 ~ 5,000 1 OP: 2 7/24 taper No. 50 4.9 AC 40/30 |
4.9 7.8 20 ~ 3,000 OP: 15 ~ 5,000 1 OP: 2 7/24 taper No. 50 4.9 AC 40/30 |
Feedrate | Rapid traverse rate X, Y, Z Rapid traverse rate W Rapid traverse rate B Feedrate X, Y, Z |
ipm ipm deg/min ipm |
472.4 196.8 1,080 0.04 ~ 236.2 |
472.4 196.8 1,080 0.04 ~ 236.2 |
ATC | Type of tool shank Type of retention knob Tool storage capacity Max. tool diameter pots are full Max. tool diameter adjacent pots empty Max. tool length Max. tool mass Method of tool selection |
-- -- -- inch inch inch lbs -- |
MAS BT50 MAS P50T-1 (45deg) 30 OP: 60, 90 4.92 9.44 15.74 55 Pot address random, Short cut |
MAS BT50 MAS P50T-1 (45deg) 30 OP: 60, 90 4.92 9.44 15.74 55 Pot address random, Short cut |
Power source | Electric power supply Power capacity Compressed air supply Pressure Compressed air supply Flowrate |
-- kVA psi N gal/min |
AC200/220V +/-10% 50/60Hz+/-2% 68 82.5 ~ 116 39 |
AC200/220V +/-10% 50/60Hz+/-2% 72 82.5 ~ 116 39 |
Machine Size | Machine height Floor space Mass of machine |
inch inch lbs |
126.4 173.2 x 174.4 39,600 |
126.4 191.7 x 263.4 50,600 |
Accuracy | Positioning accuracy X, Y, Z Positioning accuracy X, Y, Z with scale Positioning accuracy W Repeatability X, Y, Z Repeatability X, Y, Z with scale Repeatability W Table indexing accuracy Any angle Table indexing repeatability |
inch inch inch inch inch inch deg deg |
+/-0.00019 / full stroke +/-0.00011 / full stroke +/-0.00047 / full stroke +/-0.00011 +/-0.00007 +/-0.00031 +/-3" +/-1.5" |
+/-0.00019 / full stroke +/-0.00011 / full stroke +/-0.00047 / full stroke +/-0.00011 +/-0.00007 +/-0.00031 +/-3" +/-1.5" |