Capability & Capacity | Table diameter Max. swing Max. swing that can process a center Max. cutting height Standard (Distance from table top to tool-holder under face) Max. cutting height High type 1 (Distance from table top to tool-holder under face) Max. cutting height High type 2 (Distance from table top to tool-holder under face) Section dimension of square ram Max. size of tool shank on square ram Max. cutting force C Max. cutting force C(S) Max. table load on table Table speeds Normal Table speeds High speed Table drive motor (30min/cont.) Standard Max. table torque C Max. table torque C(S) Spindle speed Max. spindle torque Table drive motor (30min/cont.) Machining performance Drilling Machining performance Tapping |
inch inch inch inch inch inch inch inch lbs lbs lbs min-1 min-1 HP ftlbs ftlbs min-1 ftlbs HP inch mm |
78.7 157.5 125.9 70.8 86.8 102.3 9.84 x 9.84 1.2 x 1.2 7,870 6,740 44,090 2~100 2~125 AC 60/50 31,514 33,740 15~1,500 258 AC 25/20 Dia. 2.28 M36xP4 |
Travel | Horizontal travel of rail head (X-axis) Vertical travel of ram (Z-axis) Standard Vertical travel of ram (Z-axis) Long type 1 Vertical travel of ram (Z-axis) Long type 2 Vertical travel of arm (Not NC axis) Standard Vertical travel of arm (Not NC axis) High type 1 Vertical travel of arm (Not NC axis) High type 2 |
inch inch inch inch inch inch inch |
86.9 39.3 49.2 59 47.2 62.9 78.7 |
Feedrate | Feedrate (X, Z-axis) Rapid traverse rate of rail head (X-axis) Rapid traverse rate of ram (Z-axis) Rapid traverse rate of table C(S) |
ipm ipm ipm deg/min |
0.1~78.7 393 314 360 |
Tool | Type of tool shank C Type of pull stud C Type of tool shank C(S) Type of pull stud C(S) |
-- -- -- -- |
7/24 taper No.55T JIS 55P 7/24 taper No.50T JIS 50P |
Machine Size | Floor area C Floor area C(S) Machine weight C Machine weight C(S) Height Ram stroke Height C Standard Height C High type 1 Height C High type 2 Height C(S) Standard Height C(S) High type 1 Height C(S) High type 2 |
ft ft lbs lbs inch ft ft ft ft ft ft |
26.9 x 20.3 26.9 x 21.3 66,140 68,350 39.3 18.6 19.9 21.3 20.2 21.5 22.8 |